Vazirgiantzikis, I.,George, S., and Pichon, L., Surface characterisation and silver release from Ti64 and anodic TiO2 after ion implantation, Surface and Coatings Technology, 2022 : Vol 433 128115
von Willingh, S. and R. Knutsen, Effect of prior austenitisation temperature on creep rupture in Grade 22 steel. Materials at High Temperatures, 2022: p. 1-9.
Vilane, V., R. Knutsen, and J. Westraadt, Tensile property and microstructure assessment of hydrogen treated Ti-6Al-4V alloy. Materials Characterization, 2022. 184: p. 111698.
George, S. and L. Chicuba, Intermetallic and dispersoid structures in aa3104 Aluminum alloy during two-step homogenisation. Journal of Materials Science, 2022. 57(11): p. 6412-6427.
Dicks, J.A. and C. Woolard, Biodegradable Polymeric Foams Based on Modified Castor Oil, Styrene, and Isobornyl Methacrylate. Polymers, 2021. 13(11): p. 1872.
Gumede, J.I., et al., Organic chemical devulcanization of rubber vulcanizates in supercritical carbon dioxide and associated less eco-unfriendly approaches: A review. Waste Management & Research, 2021: p. 0734242X211008515.
Matthews, R., et al., Adaptation of the Point Defect Model to Simulate Oxidation Kinetics of 316L Stainless Steel in the Pressurised Water Reactor Environment. Corrosion Science, 2021: p. 109454.
Steytler, M. and R. Knutsen, Identifying Challenges to the Commercial Viability of Direct Powder Rolled Titanium: A Systematic Review and Market Analysis. Materials, 2020. 13(9): p. 2124.
von Willingh, S., R. Knutsen, and R. Curry. Influence of microstructure on the creep properties of grade p22 steel. in Joint EPRI–123HiMAT International Conference on Advances in High-Temperature Materials. 2019. ASM International.
Curry, R., R. Knutsen, and K. Singh. Mapping high temperature strain localisation in steel weldments using digital image correlation. in Advances in Engineering Materials, Structures and Systems: Innovations, Mechanics and Applications: Proceedings of the 7th International Conference on Structural Engineering, Mechanics and Computation (SEMC 2019), September 2-4, 2019, Cape Town, South Africa. 2019. CRC Press.
Matthews, R., et al., Intergranular oxidation of 316L stainless steel in the PWR primary water environment. Corrosion Science, 2017. 125: p. 175-183.
McGuire, J.K., et al., Endolaryngeal anterior commissure stent—Cheap and easy. The Laryngoscope, 2017. 127(8): p. 1869-1872.
Hart, G.L., et al., Revisiting the revised Ag-Pt phase diagram. Acta Materialia, 2017. 124: p. 325-332.
Yadav, S.D., et al., Modelling the creep behaviour of tempered martensitic steel based on a hybrid approach. Materials Science and Engineering: A, 2016. 662: p. 330-341.
Yadav, S.D., et al., Modelling the creep behaviour of tempered martensitic steel based on a hybrid approach. Materials Science and Engineering: A, 2016. 662: p. 330-341.
George, S. and C. Mias. Effect of Rolling Temperature on Annealing of aa1050 Aluminium Alloy. in Materials Science Forum. 2015. Trans Tech Publ.
Vilane, V.N., R.D. Knutsen, and J.E. Westraadt. Contribution of Hydrogen Promoted Aluminium Partitioning to Tempered αÌ Martensite Embrittlement in Ti-6Al-4V. in Materials Science Forum. 2015. Trans Tech Publ.
Yadav, S.D., et al., Characterisation and quantification of cavities in 9Cr martensitic steel for power plants. Materials Science and Technology, 2015. 31(5): p. 554-564.
Vilane, V., R. Knutsen, and J. Westraadt. Submicron Grain Size Formation in Thermohydrogenated and Deformed Ti-6Al-4V: The Effect of Processing Route on the Degree of Grain Refinement. in Advanced Materials Research. 2014. Trans Tech Publ.
Ahmadi, M.R., et al., A model for coherency strengthening of large precipitates. Scripta Materialia, 2014. 84: p. 47-50.
Vrancken, B., et al., Residual stress via the contour method in compact tension specimens produced via selective laser melting. Scripta Materialia, 2014. 87: p. 29-32
Cain, V., et al., Crack propagation and fracture toughness of Ti6Al4V alloy produced by selective laser melting., Additive Manufacturing, 2015, 5: p. 68-75...more info
K.P. Mabunda and C.I. Lang
Mabunda, K. and C. Lang, The Pt8Zr ordering transformation. Journal of alloys and compounds, 2014. 613: p. 375-378....more info
Mshumi, C., et al., Revisiting the CuPt3 prototype and the L13 structure. Acta materialia, 2014. 73: p. 326-336.
Ahmadi, M.R., et al., A model for coherency strengthening of large precipitates. Scripta Materialia, 2014. 84: p. 47-50.
Vilane, V. and R.D. Knutsen. Grain refinement in cast Ti-6Al-4V by hydrogenation, deformation and recrystallisation. in Materials Science Forum. 2013. Trans Tech Publ.
Leteba, G.M., R.R. Vanfleet, and C.I. Lang, Synthesis of V, Pt and Pt-V colloidal nanoparticles. International Journal of Nanoparticles, 2013. 6(4): p. 282-295.
Rampai, T., C. Lang, and I. Sigalas, Investigation of MAX phase/c-BN composites. Ceramics International, 2013. 39(5): p. 4739-4748.
Leteba, G.M. and C.I. Lang, Synthesis of bimetallic platinum nanoparticles for biosensors. Sensors, 2013. 13(8): p. 10358-10369.
George, S. and R. Knutsen, Composition segregation in semi-solid metal cast AA7075 aluminium alloy. Journal of Materials Science, 2012. 47(11): p. 4716-4725.
Theron, M., et al., Effect of heat treatment on the properties of laser-beam welded rheo-cast F357 aluminum. Journal of Materials Processing Technology, 2012. 212(2): p. 465-470.
Corbel, G., et al., Selective dry oxidation of the ordered Pt–11.1 at.% V alloy surface evidenced by in situ temperature-controlled X-ray diffraction. Journal of alloys and compounds, 2011. 509(23): p. 6532-6538.
Gibaud, A., et al., An X-ray scattering study of Pt1− xVx alloys. Journal of Alloys and Compounds, 2009. 484(1-2): p. 168-171.
Topić, M., et al., High temperature study on thin aluminium coatings deposited onto thick platinum substrates. Surface and Coatings Technology, 2009. 203(20-21): p. 3044-3048.
Möller, H., et al., The influence of Mn on the tensile properties of SSM-HPDC Al-Cu-Mg-Ag alloy A201. Journal of the Southern African Institute of Mining and Metallurgy, 2011. 111(3): p. 167-171.
Matthews, L. and R. Knutsen, Microstructure evolution in Ti-6Al-4V alloy during hydrogen dosing at elevated temperature. Journal of the Southern African Institute of Mining and Metallurgy, 2011.
George, S. and R. Knutsen, Solidification of an Al-Zn alloy during semi-solid processing. Journal of the Southern African Institute of Mining and Metallurgy, 2011. 111(3): p. 183-186.
Buys, A.G., V. Cain, and R. Knutsen, Performance evaluation of aluminium alloy 7075 for use in tool design for the Plastics Industry. 2010.
Masuku, E., et al. Optimisation of the solution heat treatment of rheo-processed Al-Cu-Mg-(Ag) alloys A206 and A201. in Materials science forum. 2009. Trans Tech Publ.
Knutsen, R., C. Steyn, and M. Nicol, Building Bridges: Linking universities with the manufacturing industry. Gateways: International Journal of Community Research and Engagement, 2009. 2: p. 144-159.
Knutsen, R.D., et al., Influence of temper condition on microstructure and mechanical properties of semisolid metal processed Al–Si–Mg alloy A356. International Journal of Cast Metals Research, 2009. 22(6): p. 417-421.
Matthews, L. and R. Knusten, Mechanistic study of oxygen deep-case hardening in titanium alloys, in Proceedings of the Microscopy Society of Southern Africa. 2009.
Matthews, L. and R. Knusten, Embrittlement of Ti-6Al-4V alloy by hydrogen dosing at elevated temperature, In Proceedings of the Microscopy Society of Southern Africa. 2009.
George, S. and R. Knutsen. Microstructural evolution of a SSM cast aluminium alloy during in situ heating in the SEM. in Proceedings of the Microscopy Society of Southern Africa. 2009.
Banda, W., et al., Determination of the phase transformation temperatures of the Fe-Co-Cu-Si system in the Fe-rich corner by thermal analysis. Metallurgical and Materials Transactions B, 2008. 39(5): p. 655-661.
Bhattacharyya, P., et al., Noble metal catalytic contacts to sol–gel nanocrystalline zinc oxide thin films for sensing methane. Sensors and Actuators B: Chemical, 2008. 129(2): p. 551-557.
Banda, W., et al., Liquidus temperature determination of the Fe–Co–Cu system in the Fe-rich corner by thermal analysis. Journal of Alloys and Compounds, 2008. 461(1-2): p. 178-182.
Nxumalo, S. and C. Lang. Dislocations in Pt8V ordered alloys. in Journal of Physics: Conference Series. 2008. IOP Publishing.
C I Lang, D R G Mitchell and S Nxumalo
The ordering transformation in platinum-11 at.% vanadium, Proc. Microscopy Society of Southern Africa 37, 18 (2008).
C Mshumi & C I Lang
Size effects in tensile testing, Proc. Microscopy Society of Southern Africa 37, 22 (2008).
S Parker and R D Knutsen
Analysis of microstructure evolution during Steckel mill rolling of AISI304 stainless steel, ISIJ International, 48 (2), 200-207 (2008)
. ...more info
G Kunene, G Govender, L Invanchev, RD Knutsen and H Burger
The influence of heat treatments for laser welded semi-solid metal cast A356 alloy on the fracture mode of tensile specimens, In Proc. 10th International Conference on Semi-Solid Processing of Alloys and Composites (S2P 2008), Sept. 2008, Aachen, Germany, Trans Tech Publications,141-143, 169-174 (2008) (peer reviewed).
G Govender, L Ivanchev, H Burger, RD Knutsen and G Kunene
Weldability of SSM Rheo Processed Aluminium Alloy A356, In Proc. 10th International Conference on Semi-Solid Processing of Alloys and Composites (S2P 2008), Sept. 2008, Aachen, Germany, Trans Tech Publications, 141-143, 773-778 (2008) (peer reviewed).
V Cain and R D Knutsen
Influence of grain size and niobium content on the creep resistance of Type 441 ferritic stainless steelI, In Proceedings of the Microscopy Society of Southern Africa, 38, 10 (2008)
S L George and R D Knutsen
Post-solidification homogenisation of AA7075 components formed by semi-solid metal casting, In Proceedings of the Microscopy Society of Southern Africa, 38, 13 (2008)
L A Matthews and R D Knutsen
Influence of thermal oxidation processing on grain structure evolution in a titanium α/β alloy, In Proceedings of the Microscopy Society of Southern Africa, 38, 20 (2008)
J H. O’Connell, J R D Knutsen, H. Neethling and M. Lee
Characterization of polycrystalline SiC using SEM and EBSD, In Proceedings of the Microscopy Society of Southern Africa, 38, 25 (2008)
S Nxumalo , M P Nzula and C I Lang
Order hardening of Pt8X alloys, Materials Science and Engineering: A, 445-446, 336-340 (2007)....more info
D Miller, K Vuso, P Park-Ross and C I Lang
Welding of platinum jewellery alloys, Platinum Metals Review 51, 23-26 (2007)....more info
C Mshumi and C I Lang
Strengthening of platinum 5 wt.% copper, Platinum Metals Review 51, 78-82 (2007)....more info
M Topic, S Nxumalo, R Bucher, C A Pineda-Vargas, V Pischedda and C I Lang
Phase Transformations in Platinum-Aluminium Coatings, Proc. European Materials Research Society Spring Meeting, Grenoble, France, in press, 2007.
R D Knutsen
Correlating microstructural features and surface roughening in ferritic stainless steel, Mat. Sci. Forum, vol. 550, 65-74 (2007)...more info
A Vahed, N Lachman and R D Knutsen
Failure investigation of soldered stainless steel orthodontic joints exposed to artificial saliva, J. Dental Materials, 23, 855-861 (2007)...more info
M Carelse and CI Lang
Ordering transformation in a platinum copper jewellery alloy, Proc. Microscopy Society of southern Africa, 35, 5 (2005)
......more info
S Nxumalo and CI Lang
A study of the thermodynamic stability of the Pt8V ordered phase, Proc. Microscopy Society of southern Africa 3, 6 (2005).
S. Nxumalo and C.I. Lang
A study of equilibrium in the platinum-chromium system, Proc. Microscopy Society of Southern Africa, Pretoria, South Africa 34, 16 (2004).
M. Carelse, K. Jackson and C.I. Lang
A heat treatable copper alloy for jewellery applications, Proc. Microscopy Society of Southern Africa, Pretoria, South Africa 34 ,17 (2004).
M.P. Nzula and C.I. Lang
Order-hardening in platinum 10 at. % chromium, Proc. Microscopy Society of Southern Africa, Pretoria, South Africa 34,18 (2004).
M.P. Nzula, C.I. Lang and D.J.H. Cockayne
The Study of the Formation of Pt8Cr in the Platinum-rich Portion of the Pt-Cr Binary, Proceedings of Microscopy and Microanalysis 2003, San Antonio, TX 9 (suppl2), 592 (2003).
T. Keraan and C.I. Lang
High temperature investigation into platinum-base superalloys, Proc. Microscopy Society of Southern Africa, Cape Town, South Africa 33,16 (2003).
W. Banda, C.I. Lang, J.J. Eksteen and L. Lorenzen
Evaluation of the Fe-Rich corner of the Fe-Co-Cu alloy system. Proc. Microscopy Society of Southern Africa, Cape Town, South Africa 3, 14 (2003)
M.P. Nzula and C.I. Lang
TEM analysis of platinum 10 at.% chromium, Proc. Microscopy Society of Southern Africa, Johannesburg, South Africa 31,16 (2001)
T.P. Shale and C.I. Lang
SEM analysis of sintered polycrystalline diamond, Proc. Microscopy Society of Southern Africa, Johannesburg, South Africa 31,16 (2001)
S Nxumalo and C I Lang
Dislocations in ordered Pt 11 at.% V, Proc. Microscopy Society of Southern Africa, 36, 13 (2006).
C Mshumi and C I Lang
Order harding of Pt 5 wt.% Cu, Proc. Microscopy Society of Southern Africa, 36,10 (2006).
PS Bate, R D Knutsen, I Brough and FJ Humphreys
The characterisation of low angle-angle boundaries by EBSD, J. Microscopy, 220 (1), 36-46 (2005)...more info
R D Knutsen
Orientation clustering in ferritic stainless steel, In Proceedings of the Microscopy Society of Southern Africa, 36,17 (2006)
S L George and R D Knutsen
Evaluation of the stress relaxation technique for measuring softening kinetics in aluminium alloys, In Proceedings of the Microscopy Society of Southern Africa, 36, 16 (2006)
M. Carelse and C.I. Lang
Order hardening in platinum 14 at.% copper, Scripta Materialia 54 1131-1315 (2006)...more info
K.M. Jackson and C.I. Lang
Mechanical Properties Data for Pt-5 wt.% Cu and Pt-5 wt.% Ru alloys, Platinum Metals Review 50 (1) 15-19 (2006)...more info
M.P. Nzula, C.I. Lang and D.J.H. Cockayne
The formation of Pt8Cr in Pt 10 at.% Cr, J. Alloys and Compounds, 420 (1-2) 165-170 (2006)...more info
S. Nxumalo and C.I. Lang
Thermodynamic stability of Pt8V, J. Alloys and Compounds, J. Alloys and Compounds, 2006, in press....more info
PS Bate, RD Knutsen, I Brough and FJ Humphreys
"The characterisation of low angle-angle boundaries by EBSD". J. Microscopy, vol. 220 (1), 2005, pp 36-46.
D. Miller, T. Keraan, P. Park-Ross, V. Husemeyer and C.I. Lang
Casting platinum jewellery alloys: the effects of composition on microstructure, Platinum Metals Review 49 (3) 110-117 (2005)...more info
D. Miller, T. Keraan, P. Park-Ross, V. Husemeyer, A. Brey, I. Khan and C. I. Lang
Casting platinum jewellery alloys: the effects of casting variables on fill and porosity, Platinum Metals Review 49 (4) 184-182 (2005)....more info
K.M. Jackson, M.P. Nzula, S. Nxumalo, and C.I. Lang
Mechanical Behavior of a Pt-Cr Jewelry Alloy Hardened by Nano-Sized Ordered Particles, in Integrative and Interdisciplinary Aspects of Intermetallics, ed. M.J. Mills, H. Inui, H. Clemens and C-L. Fu (Mater. Res. Soc. Symp. Proc. 842, Warrendale, PA, 2005) 5.52: 1-6.
D.O. Moumakwa and K. Marcus
Tribology in coal-fired power plants, Tribology International 38(2005) 805-811...more info
K.Marcus
Tribology based research at UCT: some recent case studies. Tribology International, 38( 2005)pp 843-847...more info
N.V. Klaas, K. Marcus and C. Kellock
The tribological behaviour of glass filled polytetrafluoroethylene, Tribology International, 38( 2005) Pp 824-833...more info
J McC Buchanan, RD Knutsen and JA Basson
"Solving for friction effects during mechanical compression testing". SA Mech Eng. (R & D Journal), vol. 20 (2), 2004, pp 3-7.
RD Knutsen, CI Lang and J Basson
"Discontinuous cellular precipitation in a Cr-Mn-N steel with niobium and vanadium additions"
Acta Materialia, 52 (2004) 2407-2417
K Marcus
"Mechanical behaviour of glass and carbon fibre reinforced composites at varying strain rates"
Composite Structures, 2003
S. Roy, C. Jacob, C. Lang and S. Basu
Studies on Ru/3C-SiC Schottky Junctions for High Temperature Hydrogen Sensors, Journal of The Electrochemical Society 150, H135-H139 (2003).
M.P. Nzula, C.I. Lang and D.J.H. Cockayne
The Study of the Formation of Pt8Cr in the Platinum-rich Portion of the Pt-Cr Binary, Proc. Microsc Microanal 9 (suppl2), 592 (2003), Proceedings of Microscopy and Microanalysis 2003, San Antonio, TX.
M.P. Nzula and C.I. Lang
Ordering in platinum-chromium alloys, Proc. ICEM: International Congress on Electron Microscopy, Durban, South Africa (2002).
A Turnbull, ER de los Rios, RB Tait C Laurent and S Bobaid
"Improving the fatigue crack resistance of Waspallloy by shot peening"
Fatigue and Fracture of Engineering Materials and Structures, Vol. 21, 1998, 1513 - 1524
Acta Materialia, vol 50 (2002), pp. 2881-2893
NJ Wittridge and RD Knutsen
"Modelling surface ridging in ferritic stainless steel"
Mat. Sci. Technology, vol 18 (2002), pp. 1279-1285
MP Nzula and CI Lang
"Ordering in platinum-chromium alloys"
Proc. ICEM: International Congress on Electron Microscopy, Durban, South Africa (2002)
PC Taylor and RB Tait
"Effects of fly ash on fatigue and fracture properties of hardened cement mortar"
Cement and Concrete Composites, Vol. 21, 1999, pp 223 - 232
Acta Materialia, vol 49 (2001), pp. 2739-2749
RB Tait and J Press
"An experimental study of the residual stresses, and their alleviation, in tube to tube-sheet welds of industrial boliers"
Engineering Failure Analysis, Vol 8, 2001, pp15-27
RD Knutsen, JA Basson and CN Machio
"The influence of austenite potential on the annealing behaviour of AISI430 ferritic stainless steel"
In Proc. Recrystallisation & Grain Growth, Aachen, Germany, (2001), vol 2, pp. 1161-1166
RD Knutsen, A Duckham and O Engler
"Moderation of recrystallisation texture by nucleation at copper-type shear bands in Al-1Mg"
K Marcus
"An Investigation into the Fracture Behaviour of Ethylene Propylene Impact Copolymers"
4th Annual UNESCO School and IUPAC Conference on Macromolecules and Materials Science, Stellenbosch Univ., 9-11 April, 2001
JA Basson, RD Knutsen and CI Lang
"Twin formation during discontinuous precipitation in an austenitic stainless steel"
In Proc. Recrystallisation - Fundamental Aspects and Relations to Deformation Microstructure, Risoe, Denmark, (2000), pp. 243-249
CI Lang, D Sordelet, M Besser, D Shechtman, FS Biancaniello and EG Gonzalez
"Quasicrystalline Coatings: Thermal evolution of structure and properties"
Journal of Materials Research 15, 1894 (2000)......more info
RD Knutsen, A Duckham and O Engler
"Influence of deformation variables on the formation of copper-type shear bands in Al-1Mg"
K Marcus
"An Investigation of Composite Compressor Blades"
3rd Int. Conf. On Composite Science and Technology, Durban, South Africa, 2000, pp 129-134
K Marcus
"Finite Element Analysis of Composite Turbine Blades"
Int. Conf. On Applied Mechanics, Durban, South Africa, 2000, pp 97-102
K Marcus
"On Composite Turbine Compressor Blades"
ECCM 9: Composites - From Fundamentals to Exploitation, Brighton, UK, 2000
K Marcus
"Structure-Property Relationhips in Polypropylene Ethylene Impact Copolymers"
3rd Annual UNESCO School and IUPAC Conference on Macromolecules and Materials Science, Stellenbosch Univ., 8-9 April, 2000
C.I. Lang, F.S. Biancaniello, S.D. Ridder, D.J. Sordelet, N.F. Besser & D.Shechtman
Characterization of an Al70,9Cu9Fe10Cr10B0.1 stable quasiperiodic material as a wear resistant thermal spray coating. Proceedings of a symposium, Powder Materials: Current Research and Industrial Practices, The Minerals, Metals & Materials Society (TMS), Cincinnati, Ohio, 327 (1999).
C.I. Lang
Thermophysical properties of aluminium ruthenium alloys. Proc. 1st International Conference on Thermophysical Properties of Materials, Singapore, 441 (1999)
RD Knutsen, FJ Humphreys, SA Court and H-L Yiu
"Cube texture stability after high temperature plane strain compression of a commercial Al-5Mg alloy"
In Proc. RECRYSTALLISATION 99, Tsukuba Science City, Japan, (1999), eds. T Sakai and HG Suzuki, JIM, pp. 209-214
RD Knutsen, FJ Humphreys, PS Bate and SA Court
"Texture stability during high temperature plane strain compression of a commercial Al-Mg alloy"
In Proc. ICOTOM 12, Montreal, Canada, (1999), ed. JA Szpunar, vol 1, pp. 617-622
RD Knutsen and NJ Wittridge
"A microtexture based analysis of the surface roughening behaviour of an aluminium alloy during tensile deformation"
Mat. Sci. Eng., vol 269 (1999), pp. 205-216
CI Lang, D Shechtman and EG Gonzalez
"Friction and wear properties of quasiperiodic material coatings" Bull. Mater. Sci. 22 (1999)
JA Cotton, RD Knutsen and CI Lang
"The influence of niobium and vanadium on the microstructure and mechanical properties of a high nitrogen stainless steel"
Materials Science Forum 318-320, 271 (1999)
RP Matthews, CI Lang and D Shechtman
"Sliding wear of quasicrystalline coatings"
Tribology Letters 7, 179, (1999)
CI Lang
"Thermophysical properties of aluminium ruthenium alloys"
Proc. 1st International Conference on Thermoyphysical Properties of Materials, Singapore, 441 (1999)
C.I Lang and J. Tapson
Resistometric mapping using a scanning tunneling microscope, MRS Symposium Proceedings 500, 15 (1998).
RD Knutsen and DJ Mills
An investigation of the tribological behaviour of a high nitrogen Cr-Mn austenitic stainless steel" Wear, vol 215 (1998), pp. 83-90
RD Knutsen and A Duckham
Asymmetric flow during plane strain compression testing of aluminium alloys"
Mat. Sci. Eng., vol 256 (1998), pp. 220-226
SA Anderson and CI Lang
"Thermal conductivity of ruthenium aluminide (RuAl)"
Scripta Materialia 38, 493 (1998)
K Marcus
"An Invesitigation of Erosive the Erosive Behaviour of Fibre-Reinforced Composite Materials"
Electron Micr. Soc. of Southern Africa, 38th Annual Conf., Bloemfontein, 1999, p21
K Marcus
"Use of Electron Microscopy to Investigate the Structure of Poly (Propylene-Ethylene) Impact Copolymers"
Electron Micr. Soc. of Southern Africa, 38th Annual Conf., Bloemfontein, 1999, p9
K Marcus
"Composite Turbine Compressor Blades"
Proc. 2nd Int. Conf. On Composites at Lake Louise, Session R-Mechanical Properties of Composites, Lake Louise, Canada, 1999
K Marcus
"The Effect of Strain Rate on the Fibre Failure Modes for Polymer Matrix Composites"
Electron Micr. Soc. of Southern Africa, 40th Annual Conf., Vol 31, Johannesburg, 2001, p15
K Marcus, K Sole, and R Patil
"An Investigation into the Fracture Behaviour of Ethylene Propylene Impact Copolymers, Polymer Characterization and Materials Science"
Macromolecular Symposia, R D Sanderson and H Pasch (eds), Wiley-VCH, ISBN 3-527-30468-1, 2002
R Patil, K Marcus and B Sole
"An Investigation into the Fracture Behaviour of Poly (Propylene-Ethylene) Copolymers"
Journees D'Etudes Sur Les Polymeres, Boumerdes, Algeria, April 2002, CD ISSN 112-3788
R Ochola, K Marcus, G Nurick, and T Franz
"Modelling damage of Polymer Matrix Composites at various Strain Rates"
Composites Africa, Johannesburg, August, 2002
PATENTS
S. Nxumalo and C.I. Lang
Hardening of metal alloys, PCT Patent WO 2006/024928 A1 (2006).
S. Nxumalo and C.I. Lang
South African Patent No. 2004/6994. Hardening of low solute content platinum alloys by heat treatment (2004).
N. Towle, C.I. Lang and D. Miller
South African Patent No. 99/7376. Hardening of low solute content platinum alloys (1999).